1, Product's specification details
| Basic size information |
| Color | White |
| Pitch | 1.0mm |
| Housing Material | Nylon66 UL94V-0 |
| Application | signal, wire to board |
| Wire Insulation Diameter | 0.80mm max. |
| Terminal materials | Brass material, tin-plated finish |
| Terminal Package | 15K pcs/reel |
| Suitable Terminal | A1002-T |
| Terminal processing method | E-stamping before tin-plated or gold-flash |
|
| Electrical properties |
| Current Rating | 1A AC, DC |
| Voltage Rating | 50V AC, DC |
| Contact Resistance | 30mΩ Max |
| Insulation Resistance | 100mΩ min |
| Withstanding Voltage | 500V AC/minute |
|
| Mechanical properties |
| Temperature range | -25℃ to 85 ℃ |
| Terminal Insertion Force | 0.50kgf (Max.) |
| Terminal/Housing Retention Force | 0.50kgf (Min.) |
| Pin Retention Force | 0.50kgf (Min.) |
|
| Other information please kindly check the following picture. |
2, Introduction for this series products
Please kindly notice that the A1002 series product, if you can buy
this product as a set, the price will be very reasonale and
favorable.
1, Terminals:A1002T(tin-plated flash or gold-flash)
2, Housing: A1002H-NP & A1002HA-2XNP & A1002HA-2XNP new version
3, Relevant engineering drawing and test report
The next attachment is detailed product file for your reference, it
will be helpful to you.
Dimension drawing
Testing report
3. Ratings & Applicable Wires
| Item | Standard |
| Rated Voltage (Max.) | 50V AC/DC | Insulation O.D. 0.80mm (Max.) |
| Rated Current (Max.) And Applicable Wires | AWG#28 | 1A AC/DC |
| AWG#30 | 1A AC/DC |
| AWG#32 | 0.5A AC/DC |
| Ambient Temperature Range | -25℃ ~ +85℃* |
*: Including terminal temperature rise
4. Electrical Performance
| Test Description | Procedure | Requirement |
| 4-1 |
Contact Resistance
| Mate connectors, measure by dry circuit, 20mV max., 10mA.(Based
upon JIS C5402 5.4) | 20mΩ (Max.) |
| 4-2 | Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground.
(Based upon JIS C5402 5.2/MIL-STD-202 Method 302 Cond. B) | 100MΩ (Min.) |
| 4-3 | Dielectric Withstanding Voltage | Mate connectors, apply 250V AC (rms) for 1 minute between adjacent
terminal or ground. (Based upon JIS C5402 5.1/MIL-STD-202 Method
301) | No Breakdown. |
| 4-4 | Contact Resistance on Crimped Portion | Crimp the applicable wire on to the terminal, measure by dry
circuit, 20mV (Max.)., 10mA. | 5mΩ (Max.) |
5. Mechanical Performance
| Test Description | Procedure | Requirement |
| 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm /
minute. | Refer to paragraph 7 |
| 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#28 | 1.0kgf (Min) |
| AWG#30 | 0.8kgf (Min) |
| AWG#32 | 0.5kgf (Min) |
| 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) |
| 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing. | 0.50kgf (Min.) |
| 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.50kgf (Min.) |
| 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per
minute. | Contact Resistance 40mΩ (Max.) |
| 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each
X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) |
| 5-8 | Physical Shock | 490m/s²｛50G｝,3 strokes in each X.Y.Z. axes. (Based upon JIS
C0041/MIL-STD-202 Method 213B Cond. A) |
4, Our product family show
Please kindly look the next picture, you can know our product range
by an easy way. Our main product are wire housing, wire to board
connectoor, wire to wire connector, board-in connectors, FPC/FFC
connectors and more. We also can controll defective rate in a low
value, so our parts are accepted by famouse and international
company like TPV, LeTV, Emerson, Amphenol Corporation, Skyworth,
LuXshare, BYD etc. And the all products are certificated by REACH,
UL, RoHS. In order to protect the evironment, some parts are
halogen free.
