Female housing Wire to wire Connector Pitch 3.0mm for power dual
Row
5. introduction
Pitch3.0mm, wire to wire and wire to board connector C3030series
| Specifications | Pitch Size | Pitch 3.0mm, |
| Current rating | 3A AC, DC |
| Voltage rating | 250V AC, DC |
| Withstanding voltage | 500V AC/minute |
| Contact resistance | 100 mΩ Min |
| Temperature range | -25°C— 85°C |
| Insulation resistance | 1000 mΩ Min |
| Rated Current (Max.) And Applicable Wire | AWG#20 | 5A | AC/DC |
| Responsive Time | AWG#22 | 5A | AC/DC |
| Panel Life | AWG#24 | 4A | AC/DC |
Mechanical Performance
|
| Test Description | Procedure | Requirement |
| Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm /
minute. | Refer to paragraph 7 |
| Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#20 | 6.0kgf (Min.) |
| AWG#22 | 4.0kgf (Min.) |
| AWG#24 | 3.0kgf (Min.) |
| Terminal Insertion Force. | Insert the crimped terminal into the housing. | 1.50kgf (Max.) |
| Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing. | 2.50kgf (Min.) |
| Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 1.50kgf (Min.) |
| | | | | | |
Description
1, C3030series is divided into C3030HF-NP, C3030HM-NP(single row
male/ female housing), C3030HMA-NP, (single row without lock female
housing), C3030HMA-2*NP, (dual row without lock female housing,)
C3030HF-2*NP, C3030HM-2*NP,(Dual row male, female housing),
Terminal:C3030F-TPE -A(Used in C3030HF series
housings)C3030M-TPE(used in C3030HM serieshousing).
C3030WV-F-NP/C3030WV-F-2*NP(Mates with C3030HF series single/dual
row housing, single/dual row with foot 180°straight needles DIP
type wafer.) ,C3030WR-F-NP,C3030WR-F-2*NP, (Mates with C3030HF
series single/dual row housing, single/dual row with foot 90°bended
needles DIP type wafer.)
2, Housing used t raw materials: PA66 , Fire-protection rating :UL
94-V0. /UL94-V2,The color is black ;Minimum packing quantity is
1000pcs/bag.
3. Single row housing we have: 2pins to 12pins,Dual Housing :from
2*01Pins to2*12pins;This product we have four molds and we can
produce 20—30KPCS of this product every day.
4. Terminals are stamped by Phosphor Broze, E-Stamping before
Tin-plated or Gold-flash ,Tin-plated we callingC3030F-TPE-A or
C3030M-TPE, Gold-plated we callingC3030F-GPE -Aor
C3030M-GPE,Minimum packing quantity is 10,000pcs/Reel. We can
produce them with Brass if you have this requirement. The daily
production capacity is 200 to 300 KPCS.
5. Terminals' wire range :AWG #20--#24,insulation OD
is1.85mm(Max).If you have special requirements in riveting wire
aspect, we’ll try to help you solve it.
6. There are two kinds of wafers in C3030 series for wire to board
connecting : C3030WV-F series and C3030WR-F series, The number of
pin :02P to 12P, 2*01P to 2*12P.The gluey shell’s material is PBT,
UL94-V0.The pins are brass, Tin-plated.
Applications
Our products are mainly used in wire to wire connecting, power,
Inside of some machines and some appliances, or power of PCB board.
